FC-II Filter Rod Cutter

Product introduction:

The FC-II Filter Rod Cutter is an auxiliary production device to cut the filter rod in sections by using an adjustable speed motor to rotate the round blade. It is suitable for observing the characteristics of the section at a certain position of the sample after sectioning on the production site and in the quality inspection process. It also applies to the secondary section machining of the filter rod. During the use, put the sample in the hopper and adjust the cutting position. Press the start button and the Filter Rod Cutter will run automatically, and then the segmented sample will fall into the receiving box below. You can start or end the machine just by pressing the button. The operation is simple and convenient.

Performance and features:

1. It is used for cutting the filter rod into two, or any segments (to be customized).
2. It occupies a small area with stable performance, simple and convenient to operate.
3. Start or end the machine just by pressing the button, simple and convenient.
4. Batch cutting, fast working speed.
5. The cutter is hidden inside the machine, so there is no potential safety hazard, and it can be placed on the production site for work.
6. The machine is safe with emergency stop button and automatic shutdown function when opening the door.
7. The sample cross section after cutting is flat.
8. It is suitable for cutting acetate fiber filter rods, polypropylene fiber filter rods, and polylactic acid fiber filter rods.
9. It adopts an advanced design integrating feeding, cutting and separation.
10. It is compatible with a number of filter rod lengths, and the section length can be adjusted.
11. It can increase large-capacity hoppers for continuous operation.
12. It cuts the samples through the positioning of two base surfaces to get accurate cutting length, with good repeatability and stable performance.
13. It adopts the adjustable high-speed motor to drive the blade, so that the cutting end surface is flat and does not deform, which is convenient for the research on the section characteristics of the sample.

Working principle:

The FC-II Filter Rod Cutter adopts grooved-wheel feeding mechanism for continuous feeding and slitting. The positioning of two base surfaces ensures accurate cutting length. Adjust the position of both base surfaces to set the cutting length.

Requirements for service environment:

Main performance indicators: